The Seener online store opens in 2027. Questions? Call or text +1 (603) 266-9191
Support

Help Center

Setup guides, troubleshooting and warranty help. Can't find an answer? Call or text +1 (603) 266-9191.

Setup guides

Getting started

Dock Pro and Hub Mini

  1. Connect power first (optional). Plug your USB-C charger into the hub's PD input port.
  2. Connect the hub to a USB-C port on your computer that supports video.
  3. Connect your display with an HDMI cable, then your accessories.
  4. Adjust display settings on your computer to mirror or extend your screen.

Rise and Grip

  1. Unfold the stand and place it on a flat, stable surface.
  2. Choose a height — start low and raise it until the top of the screen is near eye level.
  3. For Grip with non-magnetic phones, clean the back of your phone or case and apply the included metal ring.
  4. Attach your device and adjust the angle.
Troubleshooting

Common issues

My external display isn't detected
  • Confirm your computer's USB-C port supports video (DisplayPort Alt Mode or USB4).
  • Try a different HDMI cable and make sure the display is set to the correct input.
  • Unplug the hub for 10 seconds, reconnect it, then reconnect the display.
  • Update your operating system and graphics drivers.
The display works but only at 30Hz
  • Use an HDMI cable rated for 4K@60Hz (often labeled "Premium High Speed").
  • Check your display's settings for a mode that enables 4K@60Hz input.
  • Some computers limit refresh rate when other high-bandwidth devices are connected; try disconnecting fast USB storage to test.
My laptop charges slowly through the hub
  • Use a USB-C PD charger of 65W or more, and remember the hub keeps some power for its ports.
  • Use a cable rated for your charger's wattage, such as PowerFlex 240W.
  • Connect the charger to the port marked PD on the hub.
Ethernet isn't working
  • Check that the network cable clicks into place and the router port is active.
  • On macOS and Windows, look for a new "USB Ethernet" or "USB 10/100/1000 LAN" network interface.
  • Temporarily turn off Wi-Fi to confirm the wired connection is working.
The SD card isn't recognized
  • Insert the card with the contacts facing the correct direction and push until it seats.
  • Check that the card's lock switch is not set to "Lock".
  • Test the card in another reader; damaged or unformatted cards may not mount.
The hub feels warm

This is normal. The aluminum shell is designed to spread heat from the internal chipset. Keep the hub on a hard surface and away from soft materials that trap heat.

Need more help?

Call or text +1 (603) 266-9191 with your product name, device model and a short description of the issue.